ARC Raiders How to Complete Paving the Way: Enelica Building Location
Quick Answer: To complete Paving the Way, head to the Enelica Building in the relevant map zone, enter the structure, and finish the objective interaction inside rather than searching only the exterior; bring a safe loadout so you can extract after the task.
What Paving the Way asks you to do
Paving the Way is a location-based objective, so the main challenge is reaching the correct building and interacting with the right point inside it.
In ARC Raiders, progress often comes from careful route planning rather than raw combat skill. The game is a multiplayer extraction adventure set on a lethal future Earth threatened by ARC machinery, so even simple errands can become dangerous if you sprint in unprepared Source.
What makes this objective confusing
This quest is easy to overthink because the name points you toward a place, but the game does not always make the exact interact spot obvious.
- The building may be visible from afar, but the objective trigger is usually inside.
- Nearby landmarks can look similar, especially in industrial or ruined districts.
- Enemies and other Raiders can distract you before you confirm the correct room.
Best mindset for this quest
Treat it like a short extraction run, not a full scavenging session.
- Get in quickly.
- Confirm the objective.
- Leave with your progress intact.
If you are also working through other progression tasks, pair this with a Arc Raiders Mushroom Locations in for early-tier loadouts or a related guide for map route basics.
Enelica Building location, explained simply
The Enelica Building is the destination you should path toward, and the safest approach is to use the nearest recognizable landmark, then sweep the interior until the objective marker appears.
Because ARC Raiders is built around tension, the exact route you take matters as much as the destination. The game supports solo play as well as teams of two or three, so whether you are alone or grouped, the same rule applies: reach the building with enough stamina, ammo, and space to get out afterward Source.
How to find it without wasting time
Use a three-step search pattern:
- Identify the area name on your map or compass.
- Move toward the largest distinct structure in that district.
- Check the entrance, then the interior floors before assuming the objective is outside.
What to look for once you arrive
Inside the Enelica Building, focus on signs of mission interaction rather than loot.
- Objective markers or prompts
- Distinctive consoles, terminals, or workspaces
- High-value interior rooms that usually hold quest triggers
- Stairwells and side corridors if the main floor is empty
If the prompt does not appear immediately, do not panic. In extraction games, mission triggers are often tucked behind a door, on an upper level, or in a side room.

First-hour checklist for new Raiders
Your first hour should be spent learning survival basics, securing a cheap safe kit, and completing one simple objective run like Paving the Way.
That early hour matters because ARC Raiders has real progression depth: HowLongToBeat currently lists roughly 38.43 hours for the main story, 73.74 hours with extras, and 157.95 hours for completion Source. You do not need to master everything immediately, but you do need a workable routine.
Your first 60 minutes should look like this
- Finish the tutorial or onboarding prompts.
- Check your extraction and inventory controls.
- Run one low-risk scavenging trip.
- Learn one compact route to a quest location.
- Bring back basic materials instead of overfilling your bag.
- Test one weapon you can reliably control.
- Practice extracting even if the run feels “good enough.”
The best beginner habit
Always leave with something.
Even a small haul is valuable early on because it teaches you the rhythm of risk, looting, and extraction. The beginner trap is staying too long just because the zone still looks profitable.
A simple first-hour priority order
- Learn the map layout.
- Learn how extraction works.
- Complete one objective.
- Return safely.
- Review what you lost and kept.
Resource priority order: what to hoard, spend, and craft first
You should hoard versatile materials, spend only on survival-critical upgrades, and craft the cheapest reliable gear before chasing specialty items.
A good early economy keeps you playing instead of constantly re-farming the same starter materials. Since ARC Raiders is an extraction shooter, lost runs are part of the loop, so resource discipline matters more than short-term greed.
Hoard these first
- Universal crafting components
- Meds and healing items
- Ammo types you know you use often
- Utility items that help extraction or escape
- Quest-related materials until you know their purpose
Spend on these first
- Basic weapon reliability
- Survival consumables
- Backpack or carry-space improvements, if available in your current progression
- Anything that reduces the chance of a failed extraction
Craft these first
- Low-cost ammo and healing
- Simple utility tools
- Weapons or attachments you can use immediately
- Quest-adjacent gear for repeated objective runs
What not to waste early
- Rare-looking materials you do not yet understand
- Currency on “maybe useful” gear
- Crafting resources for builds you have not tested
- High-risk loadouts before you can consistently extract
A useful rule: if an item helps you survive or complete quests today, it is probably worth the spend. If it only sounds impressive, hold it.
Common newbie mistakes and how to fix them
New players usually fail by overcommitting, underpreparing, or ignoring the extraction part of the extraction shooter.
ARC Raiders has strong review momentum too: Steam currently shows a “Very Positive” summary with 82.8% positive reviews across 408777 reviews Source. That kind of reception usually comes from a game with a clear learning curve, and beginners benefit from respecting that curve instead of rushing it.
1. Running straight to the objective without scanning first
This gets you ambushed, delayed, or forced into a panic retreat.
Fix:
- Pause before entering the building.
- Check sightlines and sound cues.
- Clear one floor at a time.
- Move only when you know your exit path.
2. Bringing your best gear on an unfamiliar quest
This leads to avoidable losses when you die to environmental danger, third parties, or a route mistake.
Fix:
- Use a budget kit for first clears.
- Save premium gear for confident runs.
- Treat learning attempts as scouting missions.
3. Looting too long after completing the objective
This is one of the fastest ways to turn a win into a failure.
Fix:
- Complete the mission first.
- Check your inventory.
- Extract immediately unless you have a specific reason to stay.
4. Ignoring team spacing
If you play in a duo or trio, bunching up can get everyone caught by the same threat.
Fix:
- Keep a little distance.
- Cover different angles.
- Call out when you enter a building or leave one.
5. Not learning one safe fallback route
If your main path goes bad, you need a backup.
Fix:
- Pick a secondary route before the match starts.
- Memorize one place to hide, heal, or reset.
- Retreat early instead of trying to “save” a doomed push.
Graduation threshold: when you are no longer a beginner
You are out of the beginner phase when you can complete a quest run, manage your resources, and extract consistently without relying on luck.
A practical milestone is simple: if you can enter a map, find a target building like Enelica, complete the objective, and leave with a useful haul more often than not, you are past the true beginner stage.
Signs you have graduated from beginner status
- You recognize major landmarks quickly.
- You know which items are worth keeping.
- You can recover from a bad fight without freezing up.
- You plan your extraction before you start looting.
- You understand when to leave a run early.
A better way to measure progress
Do not judge yourself by kills alone.
In extraction games, smart movement and successful extractions matter more than flashy fights. Once your decisions become intentional instead of reactive, you are moving into the intermediate phase.
How to finish Paving the Way safely
You should finish Paving the Way by entering the Enelica Building, finding the actual interaction point inside, and extracting with minimal exposure.
This is the cleanest way to think about Arc Raiders How to Complete Paving the Way: Enelica Building Location: the “location” is only half the task, because success depends on surviving the trip in and the trip out.
Safe completion route
- Enter with a light, practical loadout.
- Move directly to the building.
- Check inside before assuming the objective failed.
- Complete the interaction.
- Leave immediately once the task is done.
If the building is contested
- Wait and listen before entering.
- Use cover to break line of sight.
- Reposition instead of forcing the door.
- Come back on a quieter run if needed.
Why this quest matters for long-term progress
Paving the Way is useful because it teaches the exact skills ARC Raiders expects from you later: route knowledge, interior navigation, and extraction discipline.
The game also has enough depth to reward that learning. SteamHunters tracks 50 achievements with 0 currently unobtainable achievements Source, and Valve’s global stats show the rarest tracked achievement sits at only 0.8% of players Source. That tells you the game has a meaningful skill ladder, and early quest practice helps build toward it.
Next steps after this quest
Once Paving the Way is done, your best next move is to keep building map confidence and upgrade toward a stable beginner loadout.
- related guide for early weapons and attachments
- related guide for beginner extraction route planning
- all expedition steps rewards for quest walkthroughs and map objectives
You might also like
- ARC Raiders Best Build Guide
- ARC Raiders Skill Tree Build Guide
- ARC Raiders Beginner Guide: [arc raiders codes](/guides/arc-raiders-codes), Core Tips, and Early Progression
- ARC Raiders Beginner Guide: Smart Starts, Loot Priority, and Map Routing
- ARC Raiders Walkthrough: Complete arc raiders walkthrough
Sources
- https://store.steampowered.com/app/1808500/
- https://howlongtobeat.com/?q=arcraiders
- https://en.wikipedia.org/wiki/ARC_Raiders
- https://store.steampowered.com/app/1808500/
- https://steamhunters.com/apps/1808500/
- https://steamcommunity.com/stats/1808500/achievements
You might also like
- Arc Raiders Expedition Guide: Rewards What's Reset and How to Register
- Arc Raiders Trophy Display Project Guide: All Materials and Rewards
- ARC Raiders Beginner Guide: Crafting Items and Weapons
- Arc Raiders Damage ARC enemies in the Red Lakes Beginner Guide
- ARC Raiders Beginner Guide: Arc Raiders Where to Get Rusted Gear - Guide
See also
- Arc Raiders Shared Watch Event Guide and All Rewards for Beginners
- ARC Raiders Beginner Guide
- Arc Raiders Player Count 2026: Live Steam Charts & Peak
- ARC Raiders Beginner Guide: Where to Find Industrial Battery and Start Strong
- ARC Raiders Loot Guide: Crate Types and Rarity
- Arc Raiders Steam Charts: Concurrent Players & Trends
- Arc Raiders Beginner Guide: With a View Quest Walkthrough and Early Game Essentials
- ARC Raiders Tier List: Best Picks, Strong Builds, and Situational Choices
- Arc Raiders Beginner Guide: Cold Snap Patch Notes and Update Details
- ARC Raiders Beginner Guide: Your First Steps in ARC Raiders PvE
- Arc Raiders Beginner Guide: Getting Started, Priorities, and the Blue Gate Glitch Controversy
- ARC Raiders Beginner Guide: How to Start Strong and Claim the Free Nvidia Backpack Skin Emerald Wave
- Arc Raiders Beginner Guide: First Steps, Loot Priorities, and Survival Basics
- ARC Raiders How to Complete the Controlled Access Zone Puzzle: Beginner Guide
- Arc Raiders Weather Monitor System Project Guide: Rewards Locations and Tips for Beginners
See also
- ARC Raiders Beginner Guide: First Hour, Resources, and Common Mistakes
- ARC Raiders Beginner Guide: Start Strong and Learn the Core Loop
- Arc Raiders Where to Find Rusted Tools - Guide
- Arc Raiders Where to Find Fried Motherboard in Beginner Guide
- ARC Raiders Beginner Guide: Close Scrutiny, Assessors, and Arc Operations Explained
- ARC Raiders Beginner Guide: How to Start Strong
- ARC Raiders Converging Paths Project Guide: How to Complete
- Arc Raiders Beginner Guide: Yellow Light Stick Blueprint - Wiki
- ARC Raiders Beginner Guide: Worth Your Salt Quest Walkthrough - Guide
- ARC Raiders Beginner Guide: Getting Started, Loot Priorities, and Water Filter Tips
- ARC Raiders Beginner Guide: Getting Through the First Hours
- ARC Raiders Beginner Guide: Arc Raiders Where to Get Mushrooms - Guide
- ARC Raiders Beginner Guide: Smart Start, Safe Progress, and Early Wins
- ARC Raiders Patch Notes Explained
- Arc Raiders Beginner Guide
Reviewed by
Arc Raiders Hub Editorial
Expertise: Editorial team behind Arc Raiders Hub. Content is compiled from official patch notes, community wikis, and playthrough notes, then reviewed and updated on schedule.
Sources
🔥 Popular Guides
ARC Raiders Beginner Guide: Getting Started, Loot Priorities, and Early Survival
Learn ARC Raiders basics, first-hour priorities, common mistakes, resource order, and when you’ve outgrown beginner status.
ARC Raiders Beginner Guide
Learn ARC Raiders basics, first-hour priorities, resource management, mistakes to avoid, and when you are ready for advanced play.
ARC Raiders Search Containers in the Medical Research Wing: Beginner Guide
Learn how to clear the Medical Research wing, manage resources, avoid beginner mistakes, and extract safely in ARC Raiders.
Arc Raiders Scrappy Level Up Max Meterials Requirement Guide
Learn early Scrappy progression, what to hoard, common mistakes, and the first-hour checklist for ARC Raiders beginners.
📋 Patch Notes & Updates
🛠️ Popular Tools
Was this guide helpful?
Help us grow — rate this guide so we can improve it.
Share your own tip
Found something not in the guide? Submit it below — our editors review every tip before publishing. No account required.
